Solar Cover Hook V2™ — 5 Pack
Holds More. Holds Better.
The sweet-spot Solar Hook V2 setup for larger round above-ground pools.
The Solar Cover Hook V2™ 5 Pack is designed specifically for 18’–20’ round above-ground pools, where four hooks can leave too much unsupported span and six can begin to crowd the usable side of the pool.
V2 keeps the proven width, mounting footprint, and rugged construction of the original Solar Hook while adding 3 inches to the hook tip for increased solar cover capture.
That deeper profile gives folded or rolled solar covers more room to sit securely inside the cradle, helping keep the cover supported, organized, and off the ground.
Manufactured from premium rust-proof ABS, Solar Cover Hook V2™ is built to handle heat, sunlight, moisture, and pool chemicals without the corrosion concerns of metal alternatives.
Choose Your Color
Available in:
XTR Gray
Georgia Red Clay
Espresso Brown
Why You’ll Love It
✔ Recommended for 18’–20’ round above-ground pools
✔ Five-hook configuration for balanced cover support
✔ 3” extended hook tip for increased solar cover capture
✔ Same proven width and mounting footprint as the original Solar Hook
✔ Premium rust-proof ABS construction
✔ Built to withstand heat, sunlight, moisture, and pool chemicals
✔ Reinforced one-piece design
✔ Rounded edges help protect your solar cover
✔ Pre-installed high-density foam backing helps protect your pool frame and provides a secure fit
✔ Heavy-duty zip ties included
✔ No drilling or permanent pool modifications required
✔ Designed, manufactured, and individually inspected by Kaboomstick 3DP
Dimensions
Thickness: 0.5”
Overall Height: 9.25”
Internal Hook Height: 7”
Overall Width: 11”
Internal Hook Width: 9”
Spline Height: 8.5”
What’s Included
Five (5) Solar Cover Hook V2™ hooks
Pre-installed high-density foam backing
Heavy-duty zip ties
Installation instructions
Compatibility
Compatible with many framed above-ground pools, including:
Intex Ultra XTR
Intex Prism Frame
Coleman Power Steel
Bestway Steel Pro MAX
Many other compatible framed above-ground pool systems
Because pool-frame designs vary, please compare the listed dimensions and product photos with your pool before ordering.
Why Five Hooks?
For 18’–20’ round pools, five support points provide an excellent balance between coverage, spacing, and usable storage width.
The result is better support across the folded solar cover without unnecessarily crowding the side of the pool.
Why V2?
The original Solar Hook proved the design.
V2 improves the part that matters most when storing a bulky solar cover: capture depth.
By extending the hook tip 3 inches, V2 gives the cover more room to sit securely inside the cradle while preserving the familiar fit and mounting geometry of the original.
More capture. More confidence.
Holds More. Holds Better.
Built Like a Kaboomstick Product
We don’t design products around using the least amount of material.
We design products that inspire confidence.
Every Solar Cover Hook V2™ is engineered with durability as the priority, from the premium ABS material and reinforced geometry to the individual inspection performed before it leaves our shop.
From Our Workshop to Your Backyard
Every Solar Cover Hook V2™ is proudly designed, 3D printed, assembled, and inspected in-house by Kaboomstick 3DP.
We build products we’d trust on our own pool, and we stand behind every order.
Important
Designed to support folded or rolled solar covers during storage.
Not intended to support body weight or be used as a climbing aid.
For above-ground framed pools only.
For 10’–16’ round pools, choose the Solar Cover Hook V2™ 4 Pack.
Solar Cover Hook V2™ — 5 Pack
Holds More. Holds Better.
The sweet-spot Solar Hook V2 setup for larger round above-ground pools.
The Solar Cover Hook V2™ 5 Pack is designed specifically for 18’–20’ round above-ground pools, where four hooks can leave too much unsupported span and six can begin to crowd the usable side of the pool.
V2 keeps the proven width, mounting footprint, and rugged construction of the original Solar Hook while adding 3 inches to the hook tip for increased solar cover capture.
That deeper profile gives folded or rolled solar covers more room to sit securely inside the cradle, helping keep the cover supported, organized, and off the ground.
Manufactured from premium rust-proof ABS, Solar Cover Hook V2™ is built to handle heat, sunlight, moisture, and pool chemicals without the corrosion concerns of metal alternatives.
Choose Your Color
Available in:
XTR Gray
Georgia Red Clay
Espresso Brown
Why You’ll Love It
✔ Recommended for 18’–20’ round above-ground pools
✔ Five-hook configuration for balanced cover support
✔ 3” extended hook tip for increased solar cover capture
✔ Same proven width and mounting footprint as the original Solar Hook
✔ Premium rust-proof ABS construction
✔ Built to withstand heat, sunlight, moisture, and pool chemicals
✔ Reinforced one-piece design
✔ Rounded edges help protect your solar cover
✔ Pre-installed high-density foam backing helps protect your pool frame and provides a secure fit
✔ Heavy-duty zip ties included
✔ No drilling or permanent pool modifications required
✔ Designed, manufactured, and individually inspected by Kaboomstick 3DP
Dimensions
Thickness: 0.5”
Overall Height: 9.25”
Internal Hook Height: 7”
Overall Width: 11”
Internal Hook Width: 9”
Spline Height: 8.5”
What’s Included
Five (5) Solar Cover Hook V2™ hooks
Pre-installed high-density foam backing
Heavy-duty zip ties
Installation instructions
Compatibility
Compatible with many framed above-ground pools, including:
Intex Ultra XTR
Intex Prism Frame
Coleman Power Steel
Bestway Steel Pro MAX
Many other compatible framed above-ground pool systems
Because pool-frame designs vary, please compare the listed dimensions and product photos with your pool before ordering.
Why Five Hooks?
For 18’–20’ round pools, five support points provide an excellent balance between coverage, spacing, and usable storage width.
The result is better support across the folded solar cover without unnecessarily crowding the side of the pool.
Why V2?
The original Solar Hook proved the design.
V2 improves the part that matters most when storing a bulky solar cover: capture depth.
By extending the hook tip 3 inches, V2 gives the cover more room to sit securely inside the cradle while preserving the familiar fit and mounting geometry of the original.
More capture. More confidence.
Holds More. Holds Better.
Built Like a Kaboomstick Product
We don’t design products around using the least amount of material.
We design products that inspire confidence.
Every Solar Cover Hook V2™ is engineered with durability as the priority, from the premium ABS material and reinforced geometry to the individual inspection performed before it leaves our shop.
From Our Workshop to Your Backyard
Every Solar Cover Hook V2™ is proudly designed, 3D printed, assembled, and inspected in-house by Kaboomstick 3DP.
We build products we’d trust on our own pool, and we stand behind every order.
Important
Designed to support folded or rolled solar covers during storage.
Not intended to support body weight or be used as a climbing aid.
For above-ground framed pools only.
For 10’–16’ round pools, choose the Solar Cover Hook V2™ 4 Pack.
